Serving the Milwaukee area  ·  (414) 219-0818  ·  Open Mon-Sun 7am-7pm
📞 (414) 219-0818 Free Quote

Metal Roofing in Whitefish Bay, WI (53211) · Local Professionals

Milwaukee Metal Roofing · Fast response in Whitefish Bay and the Milwaukee area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+212Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Whitefish Bay is a village of tree-lined streets, Tudor Revival and brick homes, and a lakeside setting that looks postcard-perfect until you get up on a roof. The steep slate-look roofs on those 1920s and 1930s houses take a beating from Lake Michigan air, freeze-thaw cycles, and ice dams, and that is where we come in.

Homeowners in the 53211 ZIP code call Milwaukee Metal Roofing because we understand the housing stock here, from the steep gables near Klode Park to the brick Tudors off Silver Spring Drive. We install, repair, and replace metal roofs built to handle everything Whitefish Bay weather throws at them.

Metal Roofing in Whitefish Bay (53211)

Whitefish Bay sits on a bluff above Lake Michigan, and that proximity drives a lot of what we see. The lake air accelerates corrosion on fasteners and flashing, especially on older homes with original gutters and chimneys. The housing stock is mostly 1920s and 1930s Tudor Revival and brick homes with steep roofs, many of which were originally slate. When that slate fails, homeowners often want a metal roof that looks similar but performs better. Stone-coated steel and copper are popular choices here because they match the historic look while shedding snow and resisting ice dams. The lots are often tight, with mature maples and oaks close to the house, so access can be tricky and we plan carefully to protect landscaping and siding. Drainage matters too: the grade around many Whitefish Bay homes slopes toward the house, so we pay close attention to flashing and gutter placement to keep water moving away from the foundation.

Our team has worked on roofs throughout Whitefish Bay and the surrounding Milwaukee area, from small repairs on a porch roof to full replacements on three-story Tudors. We know the local building department requirements and can help you navigate the permit process.

Our services in Whitefish Bay

How a Job Works in Whitefish Bay

Step 1: Call us at (414) 219-0818 or request a free estimate online. We will schedule a time to come out and inspect your roof, discuss your options, and answer any questions. We will also check for any signs of damage that might not be obvious from the ground.

Step 2: Once you approve the estimate, we will pull the necessary permits and schedule the work. In Whitefish Bay, tight lots and mature trees can mean we need to plan for staging materials and protecting landscaping. We will also coordinate with any HOA requirements if your neighborhood has design review. Our crew will remove the old roofing, inspect the decking, and install your new metal roof according to manufacturer specifications.

Step 3: After the job is done, we clean up thoroughly, haul away all debris, and do a final walkthrough with you to make sure you are satisfied. We leave your property clean and your new roof ready to protect your home for decades.

Pricing for metal roofing in Whitefish Bay depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs start at $450, and screw replacement and re-fastening starts at $750. Stone-coated steel and metal shingle roofing both start at $9 per square foot, while copper and specialty metal start at $20 per square foot. We always provide a free estimate so you know exactly what to expect. Call us at (414) 219-0818 to schedule yours.

My Tudor home near Klode Park has an original slate roof that is failing. Can you match the look with metal?
Yes. Many Whitefish Bay homeowners in your situation choose stone-coated steel or metal shingles that mimic the look of slate. We can bring samples so you can see how they match your home's style. These products are lighter than slate, which can be an advantage on older structures, and they handle snow and ice much better.
A storm just blew through Whitefish Bay and lifted some panels on my roof. How quickly can you respond?
We offer free storm and wind damage inspections and can usually get out within a day or two to assess the damage. If it is an emergency, call us at (414) 219-0818 and we will prioritize your call. We can tarp or secure the roof if needed and provide a written estimate for repairs.
What is the typical cost for a metal roof repair in Whitefish Bay?
Most repairs start around $450, but the final cost depends on the extent of the damage and the type of metal roof you have. Leak repairs, flashing issues, and fastener problems are common. We will give you a clear estimate before any work begins.
Do I need a permit to replace my roof in Whitefish Bay?
Yes, roofing permits are generally required for a full replacement or re-roof in Whitefish Bay. The exact requirements and fees are set by the local building department, and we can help you navigate that process. We always pull the necessary permits before starting work.
My neighbor and I share a property line, and I am worried about the roof overhang. What are the rules?
Property line issues can be tricky, and it is always best to check your survey and local ordinances. If your roof overhang crosses the property line, you may need an easement or a variance. We can help you understand the setback requirements and coordinate with your neighbor if needed.
Are you fully insured for work on my Whitefish Bay home?
Yes, we carry general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Whitefish Bay's climate?
Because of the lake air and freeze-thaw cycles, we recommend an annual inspection to check fasteners, flashing, and sealant. Cleaning gutters and removing debris from the roof also helps prevent ice dams. If you have a stone-coated steel roof, a gentle wash every few years can keep it looking new.
Why choose us?

Trusted professionals in Milwaukee

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Milwaukee

All your work handled by qualified professionals in Milwaukee

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

212+ Verified Client Reviews in Milwaukee

⭐⭐⭐⭐⭐ 4.9/5 · 212 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Milwaukee · Response within 24h · No commitment · ☎ (414) 219-0818

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Milwaukee ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm