Serving the Milwaukee area  ·  (414) 219-0818  ·  Open Mon-Sun 7am-7pm
📞 (414) 219-0818 Free Quote

Metal Roofing in West Bend, WI (53095) · Local Professionals

Milwaukee Metal Roofing · Fast response in West Bend and the Milwaukee area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (414) 219-0818
+212Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

West Bend is a city where the housing stock tells a story, from the older Victorians and farmhouses near the downtown riverfront to the mid-century ranches and newer subdivisions spreading out toward Highway 45. The lots here are often generous, with mature trees and outbuildings that take a beating from Wisconsin winters.

Homeowners in the 53095 ZIP code call Milwaukee Metal Roofing because we understand the specific challenges of roofing here: heavy snow loads, ice dams, and the freeze-thaw cycles that punish shingles and metal alike.

Metal Roofing in West Bend (53095)

West Bend sits along the Milwaukee River, with terrain that rolls and dips, creating drainage patterns that can be tricky. Many properties have steep driveways or tight side yards, which means equipment access and staging need careful planning. Older homes near the river and in the historic downtown often have steep gables and complex rooflines, while the farm-edge properties on the outskirts have large barns and outbuildings with exposed-fastener metal roofs that need regular maintenance. The area gets significant snowfall, and ice damming at the eaves is a common issue on high-elevation homes. Our team has seen it all, from corrugated panels on sheds to standing seam on porches and dormers.

We have been serving West Bend and the surrounding Milwaukee area for years, and we know the local building department requirements, the historic district guidelines, and the common failure points for metal roofs in this climate. Whether it is a repair after a storm or a full replacement, we bring that local knowledge to every job.

Our services in West Bend

How a Job Works in West Bend

Step 1: You call us at (414) 219-0818 or fill out our contact form. We schedule a free on-site assessment at your West Bend property. We will inspect your roof, discuss your options, and provide a written estimate. We will also check for any permit requirements with the city of West Bend and explain the process.

Step 2: Once you approve the estimate, we schedule the work. For West Bend homes, we pay attention to tight lot access and coordinate with any HOA or historic district requirements. We order materials, pull permits if needed, and keep you informed on timing. Our crew is experienced with the local housing stock, from older Victorians to newer ranches, and we work efficiently to minimize disruption.

Step 3: After the work is complete, we do a thorough cleanup, including magnet sweeping for nails and debris. We walk the property with you to ensure everything meets your expectations, and we provide a warranty on our workmanship. We leave your property clean and your roof ready for the next Wisconsin season.

Pricing for metal roofing in West Bend depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. For repairs, metal roof leak repair starts at $450, and screw replacement and re-fastening starts at $750. We also offer metal roof over shingles (retrofit) starting at $7 per square foot, which can be a cost-effective option for some homes. Factors like access, roof pitch, and urgency can affect the final price. Call us at (414) 219-0818 for a free estimate tailored to your West Bend property.

My West Bend home is near the Milwaukee River and has a steep roof. Can you handle the access and install a metal roof?
Yes. We regularly work on steep roofs and properties with tight access in West Bend. Our team uses specialized equipment and safety protocols to handle challenging terrain. We will assess your property during the free estimate and plan the installation accordingly, including staging and material delivery.
A storm just blew through West Bend and lifted some panels on my barn. How quickly can you respond for emergency repair?
We prioritize storm damage repairs for West Bend properties. Call us at (414) 219-0818, and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can secure the roof temporarily if needed and provide a permanent repair estimate.
What is the typical cost to replace a metal roof on a 1,500 square foot ranch in West Bend?
For a 1,500 square foot ranch, a metal roof replacement typically ranges from $13,500 to $18,000, depending on the material and complexity. Standing seam may be on the higher end. We provide a free estimate with exact pricing after inspecting your roof.
Do I need a permit to install a metal roof in West Bend, and can you help with the paperwork?
Yes, the city of West Bend generally requires a permit for roof replacement. We handle the permit application and coordinate inspections as part of our service. We will verify the specific requirements with the building department for your property.
My HOA has design rules for roof color. Can you help me get approval for a metal roof in West Bend?
We can provide material samples and documentation to help with your HOA approval process. We are familiar with common HOA requirements in West Bend and can suggest panel profiles and colors that meet the guidelines while giving you the durability of metal.
Are you fully insured for roofing work in West Bend?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in West Bend's climate?
In West Bend, we recommend annual inspections, especially after winter, to check for loose fasteners, debris buildup, and signs of ice damming. Exposed-fastener roofs may need screw replacement every few years. We offer maintenance plans and can advise on the best schedule for your roof.

Nearby service areas

📍 Milwaukee 53210📍 Wauwatosa 53226📍 West Allis 53227📍 Waukesha 53186
Why choose us?

Trusted professionals in Milwaukee

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Milwaukee

All your work handled by qualified professionals in Milwaukee

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

212+ Verified Client Reviews in Milwaukee

⭐⭐⭐⭐⭐ 4.9/5 · 212 verified Google reviews

Michelle B.
⭐⭐⭐⭐⭐
MB
Michelle B.
Waukesha

“Had these guys put up metal roofing on our barn out in the rural part of the county, and they knocked it out in two days with a four-man crew. Straight panels, clean lines, and they hauled away every last scrap of old material. Way better than I expected.”

Commercial Metal Roofing
Scott H.
⭐⭐⭐⭐⭐
SH
Scott H.
Wauwatosa

“The flashing around our front porch entry was letting water in every time it rained, and I couldn't figure out where it was coming from. Milwaukee Metal Roofing sent someone out, found the bad flashing by the brick, and fixed it the same visit. No more drips.”

Metal Roof Repair
Sarah W.
⭐⭐⭐⭐⭐
SW
Sarah W.
Racine

“We needed the roof redone on our hay barn before the season got going, and they squeezed us in fast. The corrugated panels went on straight and tight, and the crew even worked around our equipment without a complaint. Real happy with how it turned out.”

Agricultural Metal Roofing
Karen T.
⭐⭐⭐⭐⭐
KT
Karen T.
Brookfield

“We went with standing seam on our house and honestly it looks fantastic. The crew was respectful, cleaned up the yard every single evening, and finished right when they said they would. Neighbors keep asking who did it.”

Standing Seam Metal Roofing
Robert M.
⭐⭐⭐⭐
RM
Robert M.
West Allis

“Had a leak that traced back to the chimney flashing on our metal roof. They got out within a few days, resealed everything properly, and charged a fair price. Only reason it's not five stars is they were a little late on the arrival window, but the work itself was solid.”

Chimney & Skylight Repair
Tom D.
⭐⭐⭐⭐⭐
TD
Tom D.
Oak Creek

“After the last round of storms tore up our old roof, we had Milwaukee Metal Roofing come out and replace the whole thing. About 2,200 square feet done in three days, and they handled all the storm damage paperwork without me having to chase anyone. Huge relief.”

Metal Roof Replacement
James P.
⭐⭐⭐⭐⭐
JP
James P.
Milwaukee

“We did the retrofit over our existing shingles on a Tudor-style brick house, and I was nervous about how it would look. It actually turned out great, the stone-coated steel matches the character of the house way better than I thought possible. Crew was tidy and easy to deal with.”

Metal Roof Over Shingles (Retrofit)
Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Kenosha

“Wanted something that looked like the slate roof we had but without the maintenance headaches, so we went with metal shingle roofing. They matched the style of the house perfectly and the install was clean from start to finish. Would use them again in a heartbeat.”

Metal Shingle Roofing
Free Quote

Get Your Free Quote

Metal Roofing in Milwaukee · Response within 24h · No commitment · ☎ (414) 219-0818

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Milwaukee ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm