Serving the Milwaukee area  ·  (414) 219-0818  ·  Open Mon-Sun 7am-7pm
📞 (414) 219-0818 Free Quote

Metal Roofing in Milwaukee, WI (53210) · Local Professionals

Milwaukee Metal Roofing · Fast response in Milwaukee and the Milwaukee area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+212Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Milwaukee's housing stock tells its own story: Cream City brick Polish flats in Riverwest, steep-gabled Victorians in Bay View, and brick bungalows across Washington Heights, all built to shed heavy lake-effect snow and freeze-thaw ice. If you live near Sherman Park or along North Avenue in 53210, you know how ice dams and wind-driven rain find every weak point in an old roof.

Homeowners in 53210 call Milwaukee Metal Roofing because we understand these blocks. We've replaced worn shingle roofs over 1920s duplexes and installed standing seam on bungalow porches from Wauwatosa to Shorewood. When a thaw sends water through a flashing gap, we're the crew that gets the call.

Metal Roofing in Milwaukee (53210)

Milwaukee sits on bluffs cut by the Milwaukee, Menomonee, and Kinnickinnic rivers, and that terrain shapes every roofing job here. Steep gables on 1890s frame Victorians means ladder work on three sides, while low-pitch brick ranches in West Allis and Greenfield need careful panel layout to avoid ponding. Tight lots in Walker's Point and Brewers Hill mean we stage materials on the street and hand-carry panels to avoid damaging neighbors' fences or mature maples. Lake-effect snow loads and ice damming at the eaves are the dominant failure modes, so we spec snow guards and proper underlayment on every standing seam job. Older homes often have multiple shingle layers, and code limits how many you can cover, so we always verify with the local building department before recommending a retrofit.

Our team has worked on everything from corrugated R-panel barns in Mequon to copper bay window accents in Whitefish Bay. We know which Milwaukee neighborhoods have historic district review and which HOAs restrict panel profiles and colors.

Our services in Milwaukee

How a Job Works in Milwaukee

Step 1: You call (414) 219-0818 or request a free estimate online. We schedule an on-site assessment, usually within 48 hours, and inspect your roof, attic, flashing, and gutters. For storm damage, we document everything for your insurance claim, but we never promise coverage or suggest deductible waivers.

Step 2: We pull the required roofing permit from the City of Milwaukee. If your home is in a historic district or HOA, we coordinate design review before ordering materials. On tight lots in Riverwest or Bay View, we plan material drops for early morning to avoid blocking alleys. Installation typically takes 1 to 3 days for a standard bungalow, longer for complex Victorians with dormers and turrets.

Step 3: We clean up completely, magnet-sweep for nails, and walk the roof with you. We leave your property clean and provide a written warranty on labor and materials.

Pricing in Milwaukee depends on roof size, pitch, access, and condition. For a typical 1,500 sq ft bungalow in 53210, metal roof installation starts around $8 per square foot, so roughly $12,000 for materials and labor. Standing seam runs about $10 per square foot, while a retrofit over existing shingles starts at $7 per square foot. Repairs like leak fixes or flashing work start at $450, and screw replacement or re-fastening starts at $750. Snow guards and ice protection start at $1,200. These are ballpark figures; steep Victorians in Brewers Hill or tight lots in Walker's Point can add 15 to 25 percent. Call (414) 219-0818 for a free, no-pressure estimate.

My 1920s bungalow in Washington Heights has ice dams every winter. Will a metal roof stop them?
Metal roofs shed snow better than shingles, but ice dams form when warm air leaks into the attic and melts snow that refreezes at the eaves. We always recommend improving attic insulation and ventilation alongside a metal roof, plus installing snow guards and ice barriers. On steep gables common in Washington Heights, proper underlayment and eave flashing are critical. We'll inspect your attic and roof deck to find the real cause before quoting.
A storm just peeled back panels on my garage in Bay View. How fast can you get here?
We prioritize storm and wind damage calls in Milwaukee. Call (414) 219-0818 and we'll schedule an inspection, often same or next day. We tarp or secure the roof to prevent further water intrusion, then provide a written repair estimate. We also document damage for your insurance claim, though coverage decisions are up to your insurer.
What does a metal roof replacement cost for a typical duplex in Riverwest?
Most duplexes in Riverwest are 1,800 to 2,200 sq ft with steep gables and shared walls. A full replacement with corrugated or ribbed panels starts around $5.50 per square foot, so $10,000 to $12,000. Standing seam runs $10 per square foot, or $18,000 to $22,000. Tight lot access and multiple roof levels can add 10 to 20 percent. We provide a free estimate after an on-site measurement.
Do I need a permit to replace my roof in Milwaukee?
Yes, a roofing permit is commonly required for full replacement or re-roof in Milwaukee, and thresholds, fees, and inspection requirements vary by jurisdiction. We handle the permit application for you. For historic districts or HOA properties, additional design review may apply. Always verify current rules with the City of Milwaukee website before starting work.
My neighbor's tree limb punctured my metal roof. Who pays for repairs if it's on the property line?
Property line disputes are common in older Milwaukee neighborhoods with mature trees. If a limb from your neighbor's tree falls on your roof, your insurance typically covers the repair, though you may need to document the tree's condition. We provide detailed damage reports for insurance. For HOA properties, check your bylaws about tree maintenance responsibilities. We can also recommend a surveyor if the property line is unclear.
Are you fully insured for roofing work at my Milwaukee home?
Yes, Milwaukee Metal Roofing is fully insured with general liability and workers' compensation coverage. This protects you if a worker is injured on your property or if accidental damage occurs.
What maintenance does a metal roof need in Milwaukee's freeze-thaw climate?
Inspect fasteners and seals every spring and fall, especially after heavy snow or ice. Clear debris from gutters and valleys to prevent water backup. Check snow guards before winter. We offer annual inspection plans starting with a free estimate. If you see rust spots or loose panels, call (414) 219-0818 before small issues become leaks.
Why choose us?

Trusted professionals in Milwaukee

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Milwaukee

All your work handled by qualified professionals in Milwaukee

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

212+ Verified Client Reviews in Milwaukee

⭐⭐⭐⭐⭐ 4.9/5 · 212 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Milwaukee · Response within 24h · No commitment · ☎ (414) 219-0818

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Milwaukee ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm