Serving the Milwaukee area  ·  (414) 219-0818  ·  Open Mon-Sun 7am-7pm
📞 (414) 219-0818 Free Quote

Metal Roofing in Wauwatosa, WI (53226) · Local Professionals

Milwaukee Metal Roofing · Fast response in Wauwatosa and the Milwaukee area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+212Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Wauwatosa's 1920s and 30s Tudor Revival and brick bungalow neighborhoods, from the streets near Hoyt Park to the blocks around the Village, carry steep roofs that hold snow and ice at the eaves all winter.

Homeowners in 53226 call Milwaukee Metal Roofing because we know how these older roofs fail: ice dams back up under shingles, flashing pulls away from chimneys, and fasteners loosen after decades of freeze-thaw cycles. We are based in Milwaukee and work Wauwatosa and the surrounding area every week.

Metal Roofing in Wauwatosa (53226)

Wauwatosa sits on high ground west of the Milwaukee River, with mature maples and oaks that drop limbs and fill gutters. The housing stock here is mostly 1920s and 30s brick bungalows and Tudors with steep gables and dormers, plus some 1940s and 50s ranches closer to Highway 100. Those steep roofs look great but they are exactly where ice dams form, because heat escapes through older attic insulation and melts snow that refreezes at the cold eaves. We see a lot of standing seam work on dormers and porch roofs here, and snow guards are a common add-on for homeowners who are tired of ice sliding off and taking gutters with it. Access can be tight on the older streets near the Village, where alleys are narrow and mature trees hang low over the roof. We plan for that before the crew shows up, so we are not damaging landscaping or blocking neighbors.

Our team has installed and repaired metal roofs across Milwaukee and Wauwatosa for years, from small porch roofs to full replacements on two-story Tudors.

Our services in Wauwatosa

How a Job Works in Wauwatosa

Step 1: call us at (414) 219-0818 or request a free estimate online. We schedule an on-site assessment, look at the roof, attic, flashing, and gutters, and talk through what you are seeing. You get a written scope and price before any work starts.

Step 2: once you approve, we pull the required roofing permit through the City of Wauwatosa and schedule the crew. On tighter lots near the Village or under low tree canopy, we stage materials carefully and may use a conveyor or hand-carry to protect lawns and shrubs. If your home is in a historic district or HOA, we help you confirm the panel profile and color before ordering.

Step 3: we clean the site daily, run a magnet sweep for screws and metal scraps, and do a final walkthrough with you. We leave your property clean and show you exactly what was done.

Pricing in Wauwatosa depends on roof size, pitch, access, and condition. As a ballpark, metal roof installation starts around $8 per square foot, standing seam starts around $10 per square foot, and replacement starts around $9 per square foot. Metal roof over shingles (retrofit) starts around $7 per square foot, and corrugated or ribbed panel roofing starts around $5.50 per square foot. Repairs and leak repairs start around $450, screw replacement and re-fastening starts around $750, and flashing, chimney, or skylight repair starts around $600. Snow guards and ice protection start around $1,200. Steep pitches, multiple roof levels, tight alley access, and urgent storm damage can raise the number. Call (414) 219-0818 for a free, no-pressure estimate on your Wauwatosa property.

My 1920s bungalow near the Village has ice dams every winter. Will a metal roof fix that?
A metal roof helps because it sheds snow better than shingles, but ice dams are usually an insulation and ventilation problem first. We inspect the attic, check for heat bypasses, and recommend snow guards and proper flashing at the eaves. On steep Tudor roofs, standing seam with snow guards is a common fix, but we will tell you honestly if attic work needs to happen first.
A storm just lifted panels on my garage roof in Wauwatosa. How fast can you get out?
We prioritize active leaks and wind damage. Call (414) 219-0818 and describe what you see. We can often inspect the same or next day, tarp or secure what is safe, and give you a written repair scope. We also document damage for insurance claims, though coverage decisions are up to your insurer.
What does a typical metal roof replacement cost on a Wauwatosa bungalow?
Most bungalows here run roughly 1,200 to 1,800 square feet of roof. At around $9 to $10 per square foot for replacement or standing seam, that is often in the $11,000 to $18,000 range before extras like snow guards, skylight flashing, or chimney work. Steep pitch, dormers, and tight access can push it higher. We give you a firm number after the free inspection.
Do I need a permit for a metal roof in Wauwatosa?
Yes, a full replacement or re-roof typically requires a permit, and inspection requirements vary. We pull the permit and coordinate inspections as part of the job. For current rules, check the City of Wauwatosa website or call the building department, and we will confirm the details for your address before work begins.
My neighbor's tree hangs over my roof line. Can I trim it, and does my HOA need to approve a metal roof?
You can generally trim branches that cross onto your property, but check local rules and talk to your neighbor first to keep it simple. If you are in an HOA or historic district, get design approval for panel profile and color before ordering materials. We provide product samples and specs to help with that submission.
Are you insured for work on my Wauwatosa home?
Yes. We carry general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Wauwatosa's climate?
Check fasteners and seals annually, especially after heavy snow or wind, and keep gutters and valleys clear of leaves from the mature trees here. Snow guards protect gutters and entryways from sliding snow. A coating every several years can extend the life of older panels. We offer inspections and can set up a simple maintenance plan.
Why choose us?

Trusted professionals in Milwaukee

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Milwaukee

All your work handled by qualified professionals in Milwaukee

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

212+ Verified Client Reviews in Milwaukee

⭐⭐⭐⭐⭐ 4.9/5 · 212 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Milwaukee · Response within 24h · No commitment · ☎ (414) 219-0818

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Milwaukee ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm