Serving the Milwaukee area  ·  (414) 219-0818  ·  Open Mon-Sun 7am-7pm
📞 (414) 219-0818 Free Quote

Metal Roofing in Greenfield, WI (53220) · Local Professionals

Milwaukee Metal Roofing · Fast response in Greenfield and the Milwaukee area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+212Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Greenfield is a city of solid, post-war brick ranches and Cape Cods, most built between 1945 and 1965, with low-pitch roofs that take a beating from southeast Wisconsin winters. You see it all over neighborhoods off South 76th Street and Layton Avenue: shingles curling at the edges, flashing pulling away from chimneys, and ice dams forming at the eaves after a hard freeze. The lots are generous but the houses sit close together, so access and drainage matter more than you'd think.

Homeowners in the 53220 ZIP code call Milwaukee Metal Roofing because we know these roofs. We've worked on the brick ranches near Konkel Park and the Cape Cods off West Howard Avenue, and we understand how lake-effect snow and freeze-thaw cycles stress older roofing.

Metal Roofing in Greenfield (53220)

Greenfield's housing stock is mostly 1940s to 1960s brick ranches and Cape Cods with low-slope roofs, which means water sits longer and ice dams are a real problem. The ground here is generally flat, but mature trees and tight side yards can make it tricky to stage materials or get a ladder where it needs to go. We plan for that. Many of these homes have original or second-layer shingles that are curling and brittle, and flashing around chimneys and vent stacks has often failed. That's why metal roof over shingles (retrofit) is a practical option for many Greenfield homeowners: it saves the cost and mess of a full tear-off and adds a durable layer that handles snow and rain better than aging asphalt.

Our team has been serving Greenfield and the surrounding Milwaukee area for years, and we've seen every quirk these neighborhoods have. From the low-pitch ranches near South 60th Street to the Cape Cods closer to the Milwaukee border, we know what works and what doesn't.

Our services in Greenfield

How a Job Works in Greenfield

Step 1: You call us at (414) 219-0818 or fill out our contact form. We schedule a free on-site assessment at your Greenfield property, usually within a couple of days. We inspect your roof, check the attic if accessible, and talk through your options: repair, replacement, or a metal roof over existing shingles. You get a written estimate with clear pricing before any work starts.

Step 2: Once you approve, we pull the necessary permits with the City of Greenfield and schedule the work. For a typical ranch, installation takes one to three days depending on the system. We protect your landscaping and keep the site tidy. If your home is in an HOA, we can provide documentation for approval, and we always respect property lines and neighbor concerns.

Step 3: After installation, we do a thorough cleanup, including a magnet sweep for nails. We walk the roof with you, show you the finished work, and make sure you're satisfied. We don't leave until you're confident in your new roof.

Pricing for metal roofing in Greenfield depends on the size and pitch of your roof, the condition of the existing shingles, and the type of metal you choose. As a ballpark: metal roof over shingles (retrofit) starts at $7 per square foot, metal roof installation starts at $8 per square foot, and standing seam starts at $10 per square foot. Repairs like fixing a leak or replacing flashing start at $450, and screw replacement starts at $750. For a typical 1,200 to 1,500 square foot ranch, a full metal roof replacement often falls in the $9,000 to $15,000 range, but we'll give you an exact quote after inspecting your property. Call (414) 219-0818 for a free estimate.

My 1950s ranch off South 76th Street has curling shingles and ice dams every winter. Can a metal roof help?
Yes. Metal roofs shed snow and ice much better than aging asphalt, especially on low-pitch roofs common in Greenfield. We often recommend a metal roof over shingles (retrofit) to add insulation and a smooth surface that prevents ice from grabbing. We'll also check your attic ventilation and flashing, which are usually the root causes of ice dams.
A storm just blew some shingles off my roof in Greenfield. How fast can you respond?
We offer free storm damage inspections and prioritize emergency repairs in Greenfield and nearby areas. Call us at (414) 219-0818, and we'll schedule a visit as soon as possible, often within 24 to 48 hours depending on demand. We'll tarp any active leaks and provide a written estimate for permanent repairs.
What does a metal roof cost for a typical Greenfield Cape Cod?
Most Cape Cods in Greenfield are around 1,000 to 1,400 square feet of roof area. A basic corrugated or ribbed panel roof starts at $5.50 per square foot, while standing seam starts at $10 per square foot. For a 1,200 square foot roof, you're looking at roughly $6,600 to $12,000 depending on the system and any repairs needed. We give free estimates.
Do I need a permit for a metal roof in Greenfield?
Yes, the City of Greenfield typically requires a building permit for roof replacements and some repairs. Requirements vary based on the scope of work, so we always verify with the city before starting. We handle the permit application and inspections as part of our service.
My neighbor and I share a property line, and I'm worried about snow sliding off my new metal roof onto their driveway. What can I do?
We can install snow guards to keep snow from sliding off in large sheets, which protects your neighbor's property and your landscaping. We'll also review setback requirements and work with you to position the roof and snow guards appropriately. If you have an HOA, we can provide documentation for approval.
Are you fully insured for work on my Greenfield home?
Yes, Milwaukee Metal Roofing is fully insured with general liability and workers' compensation coverage.
How often should I have my metal roof inspected in Greenfield?
We recommend an inspection every two to three years, and after any major hail or wind storm. Greenfield's freeze-thaw cycles and lake-effect snow can loosen fasteners and stress seams over time. A quick inspection can catch small issues before they become leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Milwaukee

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Milwaukee

All your work handled by qualified professionals in Milwaukee

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

212+ Verified Client Reviews in Milwaukee

⭐⭐⭐⭐⭐ 4.9/5 · 212 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Milwaukee · Response within 24h · No commitment · ☎ (414) 219-0818

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Milwaukee ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm