Serving the Milwaukee area  ·  (414) 219-0818  ·  Open Mon-Sun 7am-7pm
📞 (414) 219-0818 Free Quote

Metal Roofing in Brookfield, WI (53005) · Local Professionals

Milwaukee Metal Roofing · Fast response in Brookfield and the Milwaukee area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+212Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Brookfield is not Milwaukee's old brick-and-gable grid. It is 1990s-to-2020s subdivision country out along Capitol Drive and Bluemound Road, where large homes sit on cul-de-sacs with complex rooflines, multiple valleys, and steep front gables that face the weather. The lots are wider than in the city, but the roofs are more cut up, and that changes how metal gets flashed and finished.

We are Milwaukee Metal Roofing, and Brookfield homeowners in 53005 call us because we understand that suburban roof geometry. From the homes near Brookfield Square and the Elmbrook school campuses to the newer builds off Calhoun Road, we have seen how these roofs handle snow, ice, and summer storms. We install standing seam and gutters sized for these houses, and we fix the leaks that show up at chimneys and valleys after a hard winter.

Metal Roofing in Brookfield (53005)

Brookfield's terrain is gently rolling, with streets that follow old farm drainage patterns and newer subdivisions that sit on graded pads. That means roof runoff has somewhere to go, but it also means downspouts and gutters have to be sized and pitched correctly or water pools against foundations. The larger homes here often have multiple roof planes, dormers, and chimney chases, so flashing details matter more than on a simple city bungalow. We pay close attention to valley transitions and snow retention, because Brookfield gets the same lake-effect snow and freeze-thaw cycles as the rest of southeast Wisconsin, and ice dams at the eaves are a common call.

Our team has worked across Brookfield and the surrounding Milwaukee suburbs for years. We know which neighborhoods have HOA design review, which streets have tighter access for a delivery truck, and how to stage a job so the driveway stays usable. Whether it is a standing seam install on a two-story colonial near Brookfield East High School or a repair on a pole shed out toward the town line, we bring the same approach: measure twice, flash carefully, and leave the property clean.

Our services in Brookfield

How a Job Works in Brookfield

Step 1: You call (414) 219-0818 or request a free estimate online. We schedule an on-site assessment, walk the roof, check the attic if accessible, and look at flashing, gutters, and any signs of ice damming. You get a written scope with pricing before any work begins.

Step 2: Once you approve, we pull the Brookfield permit if one is required and coordinate with your HOA if the neighborhood has design review. On installation day, we protect landscaping, set up a staging area that keeps the driveway clear, and work in sections so the house is never fully open to the weather. For standing seam, panels are cut and formed to the exact roof dimensions, which cuts down on waste and seams.

Step 3: Cleanup is part of the job. We magnet-sweep for nails, haul away old materials, and do a final walkthrough with you to confirm the work and answer questions. We do not consider the job done until you have looked it over and signed off.

Pricing in Brookfield depends on roof size, pitch, access, and how much detail work is involved. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and replacement at $9 per square foot. A retrofit over existing shingles starts at $7 per square foot, but keep in mind that local code limits how many layers you can recover, so we will check that during the estimate. Repairs start at $450, and leak repairs start at the same. Screw replacement and re-fastening starts at $750, and gutters for metal roofs start at $9 per linear foot. Snow guards and ice protection start at $1,200. Every roof is different, so call (414) 219-0818 for a free estimate and a firm number.

My Brookfield house has a steep front gable and a valley where the garage roof meets the main roof. Does that change the metal roofing cost?
Yes, complex rooflines with multiple valleys and steep pitches take more time and material to flash correctly. We measure every plane and valley during the estimate, and we price the extra seams, trim, and labor up front. Homes in neighborhoods like those off Pilgrim Road often have this geometry, and we plan for it so there are no surprises.
A storm just blew through Brookfield and lifted some panels on my barn roof. How fast can you get out?
We treat wind damage as a priority. Call (414) 219-0818 and we will schedule an inspection as soon as possible, usually within a day or two depending on storm volume. We can secure loose panels temporarily and provide documentation for your insurance claim if needed.
What does a typical metal roof replacement cost for a 2,500 square foot house in 53005?
For a house that size with a moderate pitch and standard access, a replacement often lands in the range of $22,000 to $30,000 depending on the panel type, trim, and whether we are removing the old roof. Standing seam runs higher than exposed-fastener panels. We give you an exact price after measuring the roof and checking the deck condition.
Do I need a permit from the City of Brookfield for a metal roof, and does the HOA need to approve the color?
Most full replacements require a building permit from the City of Brookfield, and fees and inspection requirements are set by the local building department. We handle the permit application and can provide product specs for HOA design review. Many Brookfield subdivisions have architectural review, so it is best to get approval before ordering panels. We will walk you through what your association needs.
My neighbor's tree branches hang over my roof and I am worried about property lines when we replace the roof. What should I do?
It is common in Brookfield's older subdivisions to have mature trees close to the property line. Before work starts, we identify the property line and talk with you about any overhanging branches. If a branch needs to be cut back for access, we recommend getting your neighbor's OK first. We do not cross onto neighboring property without permission.
Are you fully insured for work on my Brookfield home?
Yes. We carry general liability insurance and workers' compensation coverage for every job.
What maintenance should I do on a metal roof in Brookfield to prevent ice dams and leaks?
Keep gutters and downspouts clear, especially before winter. After heavy snow, use a roof rake to pull snow off the eaves, but never walk on a metal roof yourself. Check flashings around chimneys and skylights each spring, and look for loose fasteners on exposed-fastener panels. If you see rust spots or a ceiling stain, call us for an inspection before it becomes a bigger repair.
Why choose us?

Trusted professionals in Milwaukee

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Milwaukee

All your work handled by qualified professionals in Milwaukee

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

212+ Verified Client Reviews in Milwaukee

⭐⭐⭐⭐⭐ 4.9/5 · 212 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Milwaukee · Response within 24h · No commitment · ☎ (414) 219-0818

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Milwaukee ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm