Serving the Milwaukee area  ·  (414) 219-0818  ·  Open Mon-Sun 7am-7pm
📞 (414) 219-0818 Free Quote

Metal Roofing in Mequon, WI (53097) · Local Professionals

Milwaukee Metal Roofing · Fast response in Mequon and the Milwaukee area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+212Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Mequon's larger lots, horse properties, and farm buildings sit wide open to wind and snow drifts, and that changes how a roof has to be built. From the older homes near Thiensville to the newer subdivisions off Mequon Road and Port Washington Road, we see a mix of steep shingle roofs and low-pitch outbuildings that take a beating from lake-effect snow and summer storms.

Homeowners in Mequon (53097) call Milwaukee Metal Roofing because we understand the local conditions: heavy snow loads, ice dams at the eaves, and wind that can peel panels off a barn or garage. Whether you're near Concordia University or out on a larger parcel toward the Milwaukee River, we bring the same straightforward approach and quality workmanship.

Metal Roofing in Mequon (53097)

Mequon's terrain and lot sizes create specific challenges. Many properties have long driveways and open fields that expose roofs to straight-line winds, and the grade often slopes, which affects drainage and access. Older farm buildings and horse barns frequently have corrugated or R-panel metal that needs re-fastening or replacement after years of freeze-thaw cycles. Newer homes in subdivisions off Mequon Road often have complex rooflines with dormers and valleys that require careful flashing to prevent leaks. We also see a lot of ice damming on homes with steep gables and poor attic ventilation, especially after heavy snowfalls.

Our team has worked on everything from historic homes near downtown Thiensville to modern equestrian facilities. We know how to handle the permit process with the City of Mequon and adjust for HOA design guidelines in neighborhoods like The Preserve. When we install a metal roof here, we account for the local snow load requirements and use fasteners and panels rated for high wind.

Our services in Mequon

How a Job Works in Mequon

Step 1: You call us at (414) 219-0818 or request a free estimate online. We schedule an on-site assessment at your Mequon property, where we inspect your current roof, check for damage, and discuss your options. We'll measure the roof, evaluate the decking, and talk through metal roofing styles that fit your home and budget.

Step 2: Once you approve the estimate, we handle the paperwork, including pulling permits from the City of Mequon and coordinating with any HOA. Our crew arrives on schedule and works efficiently, protecting your landscaping and keeping the site secure. For larger properties or barns, we plan access carefully to avoid damage to fields or driveways.

Step 3: After installation, we do a thorough cleanup, magnet-sweep for nails, and walk through the finished roof with you. We make sure you're satisfied and explain how to care for your new metal roof. We leave your property clean and your roof ready for Wisconsin weather.

Pricing for metal roofing in Mequon depends on the size and complexity of your roof, the material you choose, and the condition of your existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and retrofitting over shingles at $7. Repairs start at $450, and screw replacement or re-fastening starts at $750. For a typical 1,500 square foot ranch, you might be looking at $12,000 to $18,000 for a basic installation, but every project is different. We provide free estimates and explain all costs upfront. Call (414) 219-0818 to schedule yours.

My barn near the Milwaukee River has old corrugated metal that's rusting through. Can you replace it with something more durable?
Yes, we specialize in agricultural metal roofing and often replace rusted corrugated panels with standing seam or R-panel in heavier gauges. We'll assess the structure and recommend a system that handles the wind and snow loads common on Mequon's open properties.
A storm just blew some panels off my roof near Mequon Road. How quickly can you respond?
We offer free storm damage inspections and prioritize emergency repairs. Call us at (414) 219-0818, and we'll schedule a visit as soon as possible to secure your roof and prevent further damage.
What's the typical cost to repair a leak on a metal roof in Mequon?
Most metal roof leak repairs start at $450, but the final cost depends on the source of the leak (failed fastener, seam, or flashing) and accessibility. We'll give you a clear estimate before any work begins.
Do I need a permit to install a metal roof in Mequon, and can you help with that?
Yes, the City of Mequon requires permits for roof replacements and some repairs. We handle the permit application and inspections for you, ensuring the work meets local codes and is properly documented.
My HOA in Mequon has strict design rules. Can you work with them to get approval for a metal roof?
Absolutely. We've worked with many HOAs in Mequon and can provide material samples, color chips, and specifications for approval. We'll coordinate with your HOA to ensure the chosen profile and color meet their guidelines.
Are you fully insured for roofing work on my Mequon property?
Yes, we carry general liability and workers' compensation insurance.
How often should I have my metal roof inspected in Mequon's climate?
We recommend an inspection every two to three years, and after any major storm. Mequon's freeze-thaw cycles and snow loads can loosen fasteners or cause ice dams, so regular checks catch small issues before they become leaks.
Why choose us?

Trusted professionals in Milwaukee

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Milwaukee

All your work handled by qualified professionals in Milwaukee

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

212+ Verified Client Reviews in Milwaukee

⭐⭐⭐⭐⭐ 4.9/5 · 212 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Milwaukee · Response within 24h · No commitment · ☎ (414) 219-0818

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Milwaukee ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm