Serving the Milwaukee area  ·  (414) 219-0818  ·  Open Mon-Sun 7am-7pm
📞 (414) 219-0818 Free Quote

Metal Roofing in Franklin, WI (53132) · Local Professionals

Milwaukee Metal Roofing · Fast response in Franklin and the Milwaukee area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+212Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Franklin is where big suburban lots meet working farmland, and the roofs show it. Drive down Ryan Road or Loomis and you'll pass 1990s subdivision homes with steep gables next to pole barns and sheds with exposed-fastener panels, all within a few miles of the 27th Street interchange.

Homeowners in 53132 call Milwaukee Metal Roofing because we understand both sides of that mix. Whether it's a hail-battered shingle roof on a two-story colonial near Franklin High School or a rusted R-panel on a hobby barn off Rawson Avenue, we've worked on it, and we can tell you straight what it needs.

Metal Roofing in Franklin (53132)

Franklin sits on a mix of glacial till and clay-heavy soils, and that matters for roofing more than people think. On the newer subdivisions west of 27th Street, lots are graded tight and downspouts often dump near foundations, so ice damming at the eaves and gutter overflow are common after a heavy February snow. On the rural-edge properties along Ryan Road and Puetz Road, you're dealing with barns and sheds where corrugated panels have been screwed down for 30 years, and the failure is almost always the fasteners, not the steel. We see wind-lifted panels after summer straight-line storms, and we see moss and algae on north-facing slopes where shade from mature maples keeps things damp. The freeze-thaw cycles here are brutal on sealants and flashing, and road-salt air doesn't help. Our team knows how to spec a roof for that reality, not for a brochure.

We've been serving Franklin and the surrounding Milwaukee area long enough to know which neighborhoods have strict HOA design review and which unincorporated parcels fall under county rules. That saves you time and surprises.

Our services in Franklin

How a Job Works in Franklin

Step 1: You call (414) 219-0818 or request a free estimate online. We schedule an on-site assessment, usually within a few days, and we walk the roof and the attic with you. We look at decking, flashing, ventilation, and how the roof sheds water toward your lot lines. You get a written scope and a clear price, no pressure.

Step 2: Once you approve, we pull the roofing permit through the City of Franklin or Milwaukee County as required, and we coordinate with your HOA if you're in a subdivision with design review. On tight lots in the Franklin Highlands area or near the 76th Street corridor, we plan material staging so we don't block your neighbor's driveway. We protect landscaping and keep the crew on a schedule you can plan around.

Step 3: Cleanup is part of the job, not an afterthought. We magnet-sweep for nails, haul away old material, and do a final walkthrough with you. We don't leave until you've seen the finished work and know how to reach us if anything comes up.

Pricing in Franklin depends on the roof, not just the square footage. For a typical suburban ranch or colonial in 53132, metal roof installation starts around $8 per square foot, standing seam runs from $10, replacement from $9, and a retrofit over existing shingles from $7. If you're fixing instead of replacing, metal roof repair starts at $450, and leak repair is in the same range. Screw replacement and re-fastening on an older barn or shed starts at $750. Stone-coated steel and metal shingles both start at $9 per square foot, and copper or specialty metal starts at $20. The big cost factors are roof size and pitch, how many layers are already there, access around the house, and whether we're dealing with storm damage that needs immediate attention. Call (414) 219-0818 for a free estimate and a straight number.

My barn off Ryan Road has corrugated panels from the 1980s. Can you re-fasten them or do I need a full replacement?
It depends on the condition of the steel and the washers. If the panels are still sound but the screws have backed out or the neoprene washers are shot, screw replacement and re-fastening can buy you years. If the panels are rusted through at the fastener lines or the purlins are compromised, replacement is the better money. We'll tell you which one you're looking at after a free inspection.
A storm just peeled back panels on my roof in Franklin. How fast can you get out?
We prioritize active leaks and wind damage in Franklin and the surrounding area. Call (414) 219-0818 and we'll schedule a free inspection as quickly as we can, often same or next day for emergencies. We can tarp or secure the area to prevent further water intrusion while we scope the repair.
What does a metal roof cost for a typical three-bedroom ranch in 53132?
For a ranch in the 1,500 to 2,000 square foot range, most installations land between $12,000 and $20,000 depending on the profile and pitch. Standing seam is at the higher end, exposed-fastener panels at the lower end. Repair work is usually a few hundred to a couple thousand. The free estimate will give you an exact number for your roof.
Do I need a permit for a metal roof in Franklin?
For a full replacement or re-roof, yes, the City of Franklin typically requires a roofing permit, and inspection requirements apply. Rules vary for unincorporated parcels, so we confirm with the local building department before we start. We handle the permit paperwork as part of the job.
My HOA has design rules. Can you help with approval before we order panels?
Yes. Several Franklin subdivisions have design review for roof color and profile. We can provide product specs, color samples, and a description of the installation so your HOA board can review it. We'd rather get that approval before we order material than after.
Are you insured for work on my Franklin property?
We carry general liability insurance and workers' compensation coverage. If you'd like proof of coverage before we start, just ask and we'll provide it.
What should I do to maintain a metal roof in Franklin through the winters?
Keep gutters clear before the first freeze so ice damming doesn't start at the eaves. Have us check fasteners and sealant every few years, especially on exposed-fastener roofs, because freeze-thaw cycles work on those washers. Trim back overhanging branches from maples and oaks before storm season. A quick inspection in the fall can catch small issues before they become leaks.
Why choose us?

Trusted professionals in Milwaukee

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Milwaukee

All your work handled by qualified professionals in Milwaukee

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

212+ Verified Client Reviews in Milwaukee

⭐⭐⭐⭐⭐ 4.9/5 · 212 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Milwaukee · Response within 24h · No commitment · ☎ (414) 219-0818

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Milwaukee ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm